Controlling the Yeeloong fan speed

Initially published on 2011-04-28.

By default, the fan inside Lemote Yeeloong spins at pretty loud 4300 RPM almost all the time when powered-on.

On the recent Linux-libre for Lemote kernels the fan speed can be controlled via writing values to /sys/class/hwmon/hwmon0/pwm1.

Values higher than 3 work identically to 3.

The difference in cooling between 3300 and 3700 RPM is not very significant, but it makes quite a bit more noice at 3700.

The fan speed can be dynamically adjusted from user-space without risking overheating the Yeeloong by setting it (statically) too low.

First, install the program called thinkfan, then save the following into its config file:

/etc/thinkfan.conf

sensor /sys/devices/virtual/hwmon/hwmon0/temp1_input
fan /sys/class/hwmon/hwmon0/pwm1
(0, 0, 62)
(1, 60, 64)
(2, 62, 66)
(3, 64, 32767)

The format of the threshold lines is (fan step, temperature on which to step down, temperature on which to step up).

You can experiment with the values so that the thresholds help your Yeeloong stay at the temperature levels you consider safe (for me that's no higher than ~65C).

Monitoring the temperature is possible with the sensors program from the lm-sensors package. Using the config file above, the CPU in my Yeeloong runs at about 60-62 degrees Celsius, and mostly with the fan off.